LockFacet

Asset Tokenization Studio Team

LockFacet

Diamond facet exposing the default-partition lock surface and the all-partition read queries declared in ILock, registered under RESOLVER_KEY_LOCK.

Inherits the implementation from Lock and satisfies the IStaticFunctionSelectors contract required by the Diamond proxy for static selector registration. Exposes 8 selectors: lock, release, forceReleaseByPartition, getLockByPartition, getLockedAmountFor, getLockCountFor, getLocksIdFor, getLockFor. The partition-aware writes and partition-scoped reads are served by LockByPartitionFacet.

Methods

forceReleaseByPartition

function forceReleaseByPartition(bytes32 _partition, uint256 _lockId, address _tokenHolder) external nonpayable returns (bool success_)

Releases a lock unconditionally, before its expiration timestamp.

Authorised path used to recover locked balances when the holder is unable to do so. Pause-gated, partition validated against single-partition mode and restricted to callers holding ROLE_LOCKER or ROLE_CONTROLLER (checked explicitly via AccessControlStorageWrapper.checkAnyRole). Skips the LockExpirationNotReached guard that releaseByPartition enforces. Emits LockByPartitionReleased.

Parameters

Name	Type	Description
_partition	bytes32	The partition the lock lives on.
_lockId	uint256	Identifier of the lock to release.
_tokenHolder	address	The address whose tokens are returned.

Returns

Name	Type	Description
success_	bool	True when the lock has been removed and the balance returned.

getLockByPartition

function getLockByPartition(bytes32 _partition, uint256 _lockId) external view returns (struct ILock.LockData lockData_)

Returns the raw LockData entry for a given partition, scoped to the caller.

Reads the lock keyed by the message sender (resolved through EvmAccessors), not by an explicit token holder. Returns the unadjusted on-chain entry — callers that need balance-adjusted figures should use the partition-scoped reads on LockByPartitionFacet. Marked virtual so test doubles such as LockFacetTimeTravel can override it.

Parameters

Name	Type	Description
_partition	bytes32	The partition the lock lives on.
_lockId	uint256	Identifier of the lock to read.

Returns

Name	Type	Description
lockData_	ILock.LockData	The stored lock entry. All fields are zero when the identifier does not exist for the caller.

getLockCountFor

function getLockCountFor(address _tokenHolder) external view returns (uint256 lockCount_)

Returns the number of active locks held by _tokenHolder across every partition.

Parameters

Name	Type	Description
_tokenHolder	address	The address whose lock count is queried.

Returns

Name	Type	Description
lockCount_	uint256	The number of active locks across all partitions.

getLockFor

function getLockFor(address _tokenHolder, uint256 _lockId) external view returns (uint256 amount_, uint256 expirationTimestamp_)

Returns the amount and expiration of a lock created on the default partition.

Returns the default-partition figures adjusted by any pending balance-adjustment factors, evaluated at TimeTravelStorageWrapper.getBlockTimestamp().

Parameters

Name	Type	Description
_tokenHolder	address	The address whose lock is queried.
_lockId	uint256	Identifier of the lock to read.

Returns

Name	Type	Description
amount_	uint256	The locked amount, in token base units.
expirationTimestamp_	uint256	Unix timestamp at which the lock becomes releasable.

getLockedAmountFor

function getLockedAmountFor(address _tokenHolder) external view returns (uint256 amount_)

Returns the total amount currently locked for _tokenHolder across every partition, adjusted by any pending balance-adjustment factors.

Returns the default-partition figure adjusted by any pending balance-adjustment factors, evaluated at TimeTravelStorageWrapper.getBlockTimestamp().

Parameters

Name	Type	Description
_tokenHolder	address	The address whose total locked amount is queried.

Returns

Name	Type	Description
amount_	uint256	The aggregate locked amount across all partitions.

getLocksIdFor

function getLocksIdFor(address _tokenHolder, uint256 _pageIndex, uint256 _pageLength) external view returns (uint256[] locksId_)

Returns a paginated list of lock identifiers held by _tokenHolder across every partition.

Pagination is bounded by the caller through _pageLength; the returned array length is at most _pageLength. A query past the available range returns an empty array.

Parameters

Name	Type	Description
_tokenHolder	address	The address whose locks are listed.
_pageIndex	uint256	Zero-based index of the page to retrieve.
_pageLength	uint256	Maximum number of identifiers to return on the page.

Returns

Name	Type	Description
locksId_	uint256[]	Array of lock identifiers for the requested page.

getStaticFunctionSelectors

function getStaticFunctionSelectors() external pure returns (bytes4[])

Gets all function selectors of a facet

Returns

Name	Type	Description
_0	bytes4[]	Face functions selectors

getStaticInterfaceIds

function getStaticInterfaceIds() external pure returns (bytes4[])

Gets all interfaces ids of a facet.

Returns

Name	Type	Description
_0	bytes4[]	Face interface ids

getStaticResolverKey

function getStaticResolverKey() external pure returns (bytes32 staticResolverKey_)

Gets the static resolver key

Returns

Name	Type	Description
staticResolverKey_	bytes32	Static resolver key

initializeLock

function initializeLock() external nonpayable

Initialises the lock capability on the token.

Callable once; subsequent calls revert with FacetAlreadyRegistered. Requires DEFAULT_ADMIN_ROLE. Called by the factory during deployment.

lock

function lock(uint256 _amount, address _tokenHolder, uint256 _expirationTimestamp) external nonpayable returns (uint256 lockId_)

Locks _amount tokens of _tokenHolder on the default partition until _expirationTimestamp.

Pause-gated, restricted to ROLE_LOCKER, only valid in single-partition mode and against unrecovered token holders. Delegates to LockStorageWrapper.lockByPartition against the default partition and emits LockedByPartition.

Parameters

Name	Type	Description
_amount	uint256	The amount of tokens to lock.
_tokenHolder	address	The address whose tokens are locked.
_expirationTimestamp	uint256	Unix timestamp at which the lock becomes releasable.

Returns

Name	Type	Description
lockId_	uint256	Identifier assigned to the new lock for the token holder.

release

function release(uint256 _lockId, address _tokenHolder) external nonpayable returns (bool success_)

Releases a lock on the default partition previously created with lock.

Pause-gated, only valid in single-partition mode. Reverts with WrongLockId when _lockId is unknown and with LockExpirationNotReached before the lock expires. Emits LockByPartitionReleased.

Parameters

Name	Type	Description
_lockId	uint256	Identifier of the lock to release.
_tokenHolder	address	The address whose tokens are unlocked.

Returns

Name	Type	Description
success_	bool	True when the lock has been removed and the balance returned.

updateLockExpiration

function updateLockExpiration(address _tokenHolder, uint256 _lockId, uint256 _newExpirationTimestamp) external nonpayable returns (bool success_)

Updates the expiration timestamp of an existing lock on the default partition.

Pause-gated, restricted to ROLE_LOCKER, only valid in single-partition mode and against a valid lock id. Delegates the storage mutation to LockStorageWrapper.updateLockExpiration against the default partition and emits LockExpirationUpdated with both the old and new timestamps.

Parameters

Name	Type	Description
_tokenHolder	address	The address whose lock expiration is being updated.
_lockId	uint256	Identifier of the lock to update.
_newExpirationTimestamp	uint256	New Unix timestamp at which the lock becomes releasable.

Returns

Name	Type	Description
success_	bool	True when the expiration timestamp has been updated.

Events

DelegateVotesChanged

event DelegateVotesChanged(address indexed delegate, uint256 previousBalance, uint256 newBalance)

Emitted when delegate votes change due to balance changes

Parameters

Name	Type	Description
delegate indexed	address	The delegate whose votes changed
previousBalance	uint256	The previous vote balance
newBalance	uint256	The new vote balance

LockByPartitionReleased

event LockByPartitionReleased(address indexed operator, address indexed tokenHolder, bytes32 indexed partition, uint256 lockId)

Emitted when a previously created lock is released back to its token holder.

Emitted by release, releaseByPartition and forceReleaseByPartition. The released amount is not part of the event because the underlying lock entry is removed atomically; consumers can correlate with the prior LockedByPartition via (partition, tokenHolder, lockId).

Parameters

Name	Type	Description
operator indexed	address	The caller that requested the release.
tokenHolder indexed	address	The address the tokens are returned to.
partition indexed	bytes32	The partition the lock was held on.
lockId	uint256	The identifier of the lock that has been released.

LockExpirationUpdated

event LockExpirationUpdated(address indexed operator, address indexed tokenHolder, bytes32 indexed partition, uint256 lockId, uint256 oldExpirationTimestamp, uint256 newExpirationTimestamp)

Emitted when a lock's expiration timestamp is updated by a locker.

Emitted by both updateLockExpiration (default partition) and updateLockExpirationByPartition (any partition).

Parameters

Name	Type	Description
operator indexed	address	The caller that requested the update (must hold ROLE_LOCKER).
tokenHolder indexed	address	The address whose lock expiration is being updated.
partition indexed	bytes32	The partition the lock lives on.
lockId	uint256	The identifier of the lock being updated.
oldExpirationTimestamp	uint256	The expiration timestamp before the update.
newExpirationTimestamp	uint256	The new expiration timestamp after the update.

LockInitialized

event LockInitialized()

Emitted once when the lock capability is initialised on a token.

Fires exclusively from initializeLock.

LockedByPartition

event LockedByPartition(address indexed operator, address indexed tokenHolder, bytes32 indexed partition, uint256 lockId, uint256 amount, uint256 expirationTimestamp)

Emitted when an amount of tokens is locked on a specific partition until an expiration timestamp.

Emitted by both lock (default partition) and lockByPartition (any partition) so consumers can monitor every lock creation through a single topic.

Parameters

Name	Type	Description
operator indexed	address	The caller that requested the lock (typically holds ROLE_LOCKER).
tokenHolder indexed	address	The address whose tokens are locked.
partition indexed	bytes32	The partition the tokens are locked on.
lockId	uint256	The identifier assigned to the new lock for (partition, tokenHolder).
amount	uint256	The amount of tokens locked.
expirationTimestamp	uint256	The Unix timestamp at which the lock becomes releasable.

Transfer

event Transfer(address indexed from, address indexed to, uint256 value)

Emitted whenever tokens move between accounts, are minted, or are burned.

Parameters

Name	Type	Description
from indexed	address	Source account (zero address on mint).
to indexed	address	Destination account (zero address on burn).
value	uint256	Amount of tokens transferred.

TransferByPartition

event TransferByPartition(bytes32 indexed fromPartition, address operator, address indexed from, address indexed to, uint256 value, bytes data, bytes operatorData)

Emitted when tokens are transferred from one partition to another or within the same partition.

Parameters

Name	Type	Description
fromPartition indexed	bytes32	Source partition.
operator	address	Address that initiated the transfer.
from indexed	address	Token holder whose balance decreased.
to indexed	address	Recipient whose balance increased.
value	uint256	Token quantity transferred.
data	bytes	Caller-supplied data.
operatorData	bytes	Operator-supplied data.

Errors

AbafChangeForBlockForbidden

error AbafChangeForBlockForbidden(uint256 blockNumber)

Raised when attempting to change ABAF for a block that is forbidden

Parameters

Name	Type	Description
blockNumber	uint256	The block number that is forbidden

AccountHasNoRole

error AccountHasNoRole(address account, bytes32 role)

Thrown when an account does not hold a required role.

Parameters

Name	Type	Description
account	address	The account that lacks the role.
role	bytes32	The role that is not held.

AccountHasNoRoles

error AccountHasNoRoles(address account, bytes32[] roles)

Thrown when an account does not hold any of the specified roles.

Parameters

Name	Type	Description
account	address	The account that lacks the roles.
roles	bytes32[]	The roles that are not held.

AssetNotOperational

error AssetNotOperational(bytes32 configId, uint256 versionId)

Raised by InitializerStorageWrapper.checkOperational (and the related isConfigVersionOperational helper) when an operation is attempted on a configuration version that has not yet been marked operational.

Parameters

Name	Type	Description
configId	bytes32	Resolver-proxy configuration whose operational status was checked.
versionId	uint256	Configuration version whose operational status was checked.

Deactivated

error Deactivated()

Thrown when an operation guarded by onlyActivated is attempted on a token whose deactivation flag has already been set.

FacetAlreadyRegistered

error FacetAlreadyRegistered(bytes32 facetId, uint256 lastVersion)

Raised when an initialiser tries to register a facet that already has a non-zero last registered version (i.e. the facet is being re-initialised on a fresh install).

Parameters

Name	Type	Description
facetId	bytes32	Identifier of the offending facet.
lastVersion	uint256	Last version recorded for that facet at the time of the check.

InsufficientBalance

error InsufficientBalance(address account, uint256 balance, uint256 value, bytes32 partition)

Thrown when a transfer or redemption is attempted with insufficient partition balance.

Parameters

Name	Type	Description
account	address	The account whose balance was checked.
balance	uint256	The actual balance available.
value	uint256	The amount that was requested.
partition	bytes32	The partition that was checked.

InvalidLockAmount

error InvalidLockAmount()

Reverts when a lock creation is attempted with a zero amount.

Checked at the start of LockStorageWrapper.lockByPartition, which is the single entry point shared by both Lock.lock and LockByPartition.lockByPartition.

InvalidPartition

error InvalidPartition(address account, bytes32 partition)

Thrown when an account does not hold or is not associated with the specified partition.

Parameters

Name	Type	Description
account	address	Address that was checked.
partition	bytes32	Partition that was not found for the account.

IsPaused

error IsPaused()

Thrown when an operation that requires the token to be unpaused is attempted while the token is paused (own flag or any external pause contract).

LockExpirationNotReached

error LockExpirationNotReached()

Reverts when a release is attempted before the lock's expiration timestamp.

Used by the onlyWithLockedExpirationTimestamp modifier and by LockStorageWrapper.checkLockedExpirationTimestamp.

NotAllowedInMultiPartitionMode

error NotAllowedInMultiPartitionMode()

Thrown when a single-partition operation is attempted on a multi-partition token.

PartitionNotAllowedInSinglePartitionMode

error PartitionNotAllowedInSinglePartitionMode(bytes32 partition)

Thrown when a multi-partition operation specifies a partition not permitted in single-partition mode.

Parameters

Name	Type	Description
partition	bytes32	The disallowed partition supplied by the caller.

SnapshotIdDoesNotExists

error SnapshotIdDoesNotExists(uint256 snapshotId)

Thrown when the requested snapshot identifier has never been taken on this token.

Parameters

Name	Type	Description
snapshotId	uint256	The unrecognised snapshot identifier that was supplied.

SnapshotIdNull

error SnapshotIdNull()

Thrown when a snapshot identifier of zero is supplied; zero is reserved and never assigned to a valid snapshot.

UnexpectedError

error UnexpectedError(bytes4 _errorId)

Reverts when an unreachable validation state is detected.

Replaces assertions for defensive handling of logically impossible states.

Parameters

Name	Type	Description
_errorId	bytes4	Identifier of the unexpected validation condition.

UnrecognizedResolverProxyVersion

error UnrecognizedResolverProxyVersion(bytes8 _resolverProxyVersion)

Thrown when the provided proxy version does not match any BLR compatible standard.

Parameters

Name	Type	Description
_resolverProxyVersion	bytes8	proxy version that is not compatible with the BLR.

WalletRecovered

error WalletRecovered()

Thrown when attempting to recover a wallet that has already been recovered.

WrongExpirationTimestamp

error WrongExpirationTimestamp()

Reverts when an expiration timestamp is invalid.

Used for expired, past, or otherwise unacceptable expiration values.

WrongLockId

error WrongLockId()

Reverts when a lock identifier does not exist for the given (partition, tokenHolder) pair.

Used by the onlyWithValidLockId modifier and by LockStorageWrapper.checkValidLockId.